Frequency to Voltage Converter 0-200Hz to 0-5V Inverter Digital to Analog Converter FV-200Hz5V F/V Conversion Module

・QUICK RESPONSE-- Frequency and voltage conversion module has the characteristic of quick response, response time is about 0.3-0.5 seconds.
・APPLICATION-- When using the correspondence, if there is a deviation, you can adjust the blue potentiometer on the board to adjust. At the time of shipment, we have adjusted the F/V potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.
・APPLICATION-- This module is mainly designed to convert interface between PLC and frequency, Or movement control card and converter interface matching control .
・FEATURE-- If the input is turbine , etc., due to matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function.
・HIGH QUALITY-- Frequency to Voltage Converter is made of high quality electronic elements for long service life. Input pulse level is 5V 12V 24V can be directly input, no string resistor. However, the input frequency should be maintained for more than 0.5 seconds.

説明:

Specification:
Condition: Brand New
Item Type: Frequency To Voltage Conversion Module
Model: FV-200Hz5V
Function: Input 0-200Hz frequency is converted to 0-5V
Output Current: 5MA
Response Time: 0.3-0.5 seconds
Size: Approx. 4.5 x 4.7 x 1.7cm / 1.8 x 1.9 x 0.7in

Package List:
1 x Frequency To Voltage Conversion Module

Precautions for use:
1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Powered converter. At 24 levels, the power supply needs to be powered by 24VDC
3. The input is isolated by diaphragm. Guaranteed anti-interference ability.
4. For use with PLC, support NPN type. Must have a ground wire.
5. If you need to use an encoder, the encoder should be rotated at a constant speed for more than 0.5 seconds.
6. Frequency and voltage conversion module, response time is about 0.3-0.5 seconds.

Identification and wiring:
1. 12-30V--Power input positive
2. GND--Power input negative (common ground wire)
3. GND--Pulse frequency input negative (common ground wire)
4. 0-10KHZ--Pulse frequency input positive
5. GND--Pulse frequency input negative (common ground wire)
6. 0-10V-- Analog 0-10V level output

Correspondence & Linear Relationship:
20Hz is converted to 0.5V
100Hz is converted to 2.5V
200Hz is converted to 5V

カテゴリー: 電力変換器
メーカー: Walfront
ブランド: Walfront
高さ: 8.2 センチ
幅: 5.8 センチ
奥行: 1.6 センチ
重量: 0.0 Kg

当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）