X AUTOHAUX 8pcs 23209-0F010 23250-50040 Fuel Injector Nozzle for Toyota 4Runner 4.7L 2003-2005 for Toyota Land Cruiser 4.7L 1998-2006 for Toyota Tundr

【発送について】本商品は海外拠点に在庫がございます。その為、お届けまでに通常3〜14営業日程度お時間を頂戴しております。■発送時に、配送業者と追跡番号をお伝えいたします。■説明書等が付属している場合、基本的に英語表記となります。■海外からの輸送に伴い、外箱にダメージが生じたり、税関で開封される場合がございます。■税関手続き、関税支払い等すべて当方で対応させていただいております。ご安心くださいませ。(電波法上の技術基準に適合する必要がある無線機器のご検討のお客様へ:商品は並行輸入品である為、電波法上の技術基準に適合致しません。日本国内でご使用する場合、電波法に違反する恐れがございます。ご購入・ご使用には十分ご注意ください。)
・The Replacement Part Number(OE Number): 23209-0F010, 23250-50040
・Fitment: for Toyota 4Runner 4.7L 2003-2005, for Toyota Land Cruiser 4.7L 1998-2006, for Toyota Sequoia 4.7L 2001-2004, for Toyota Tundra 4.7L 2000-2004
・Fuel-Efficient Injector: High efficient fuel sprays and High Impedance Coil enable fast start up in the cold environments, low fuel consumption, and better performance.
・Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
・Package Included: 8 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc; Flow Rate: Same as

説明: Description:
Made of metal and plastic material which is durable and can use for a long time.
The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.

Specification:
Flow Rate: Same as
O-Rings Included: Yes, preinstalled
Orifice Type: 4 Holes Disc
Voltage: DC 12V
Material: Metal, Plastic
Color: Blue
OE Number: 23209-0F010, 23250-50040
Pin Number: 2
Dimension: 73x30x16mm / 2.87"x1.18"x0.63"(L*W*H)
Inner Diameter: 4mm / 0.16"
Outer Diameter: 10mm / 0.39"

Fitment:
for Toyota 4Runner 4.7L 2003-2005
for Toyota Land Cruiser 4.7L 1998-2006
for Toyota Sequoia 4.7L 2001-2004
for Toyota Tundra 4.7L 2000-2004

Note:
This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
This is a non-OEM product, accessory only!

Installation:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.

Package Included:
8 x Fuel Injector




カテゴリー: バルブ
メーカー: X AUTOHAUX
ブランド: X AUTOHAUX
高さ: 6.5 センチ
幅: 9.0 センチ
奥行: 18.0 センチ
重量: 0.4 Kg

【発送について】本商品は海外拠点に在庫がございます。その為、お届けまでに通常3〜14営業日程度お時間を頂戴しております。■発送時に、配送業者と追跡番号をお伝えいたします。■説明書等が付属している場合、基本的に英語表記となります。■海外からの輸送に伴い、外箱にダメージが生じたり、税関で開封される場合がございます。■税関手続き、関税支払い等すべて当方で対応させていただいております。ご安心くださいませ。(電波法上の技術基準に適合する必要がある無線機器のご検討のお客様へ:商品は並行輸入品である為、電波法上の技術基準に適合致しません。日本国内でご使用する場合、電波法に違反する恐れがございます。ご購入・ご使用には十分ご注意ください。)