X AUTOHAUX 16450-MFE-641 Car Fuel Injector Nozzle for Honda CBR250RA 2011 VT750C2B 2012 for Honda CBR250RA AC THROTTLE BODY 2011
【発送について】本商品は海外拠点に在庫がございます。その為、お届けまでに通常3〜14営業日程度お時間を頂戴しております。■発送時に、配送業者と追跡番号をお伝えいたします。■説明書等が付属している場合、基本的に英語表記となります。■海外からの輸送に伴い、外箱にダメージが生じたり、税関で開封される場合がございます。■税関手続き、関税支払い等すべて当方で対応させていただいております。ご安心くださいませ。(電波法上の技術基準に適合する必要がある無線機器のご検討のお客様へ:商品は並行輸入品である為、電波法上の技術基準に適合致しません。日本国内でご使用する場合、電波法に違反する恐れがございます。ご購入・ご使用には十分ご注意ください。)
・The Part Number(OE Number): 16450-MFE-641
・Fitment: for Honda CBR250RA 2AC THROTTLE BODY 2011, for Honda VT750C2B AC INLET MANIFOLD 2012, for Honda CBR250RA AC THROTTLE BODY 2011
・Fuel injector enables fast start up in cold environments; , and no modification needed.
・Product Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 12 Holes Disc
・Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM!
説明: Description:
Direct replacement of your old injector.
Made of metal and plastic material which is durable and can use for a long time.
The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
O-Rings Product Included: Yes, preinstalled
Orifice Type: 12 Holes Disc
Material: Metal, Plastic
Color: Dark Blue
Voltage: DC 12V
OE Number: 16450-MFE-641
Pin Number: 2
Dimension: 49x31x19mm / 1.93"x1.22"x0.75"(L*W*H)
Note:
This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
Please check the fitment section of this listing before you bid.
Please kindly check again your engine volume!
The color will be delivered randomly.
This is a non-OEM product, accessory only!
Fitment:
for Honda CBR250RA 2AC THROTTLE BODY 2011
for Honda VT750C2B AC INLET MANIFOLD 2012
for Honda CBR250RA AC THROTTLE BODY 2011
Product Included:
1 x Fuel Injector
Installation:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.
カテゴリー: バルブ
メーカー: X AUTOHAUX
ブランド: X AUTOHAUX
高さ: 13.2 センチ
幅: 11.3 センチ
奥行: 7.6 センチ
重量: 0.0 Kg
【発送について】本商品は海外拠点に在庫がございます。その為、お届けまでに通常3〜14営業日程度お時間を頂戴しております。■発送時に、配送業者と追跡番号をお伝えいたします。■説明書等が付属している場合、基本的に英語表記となります。■海外からの輸送に伴い、外箱にダメージが生じたり、税関で開封される場合がございます。■税関手続き、関税支払い等すべて当方で対応させていただいております。ご安心くださいませ。(電波法上の技術基準に適合する必要がある無線機器のご検討のお客様へ:商品は並行輸入品である為、電波法上の技術基準に適合致しません。日本国内でご使用する場合、電波法に違反する恐れがございます。ご購入・ご使用には十分ご注意ください。)