ポット Alpha, Linear, PC Mount, Marshall Style, B22 kΩ [送料170円から 同梱可]
641
マーシャルの交換品
Linear. (Bカーブ)
24mm.
Linear. (Bカーブ)
24mm.
追加のナットが必要な場合は、部品番号R-VM-NUT-2を参照してください。
Specification Sheet (pdf)
■測定値と仕様■
・製品測定値
Body Depth : 11.5 mm
Body Width : 24 mm
Bushing Length : 11.5 mm
Bushing Thread : M8X0.75
Hex Nut Thickness : 2.0 mm
Hex Nut Width : 11 mm
Insulation Resistance : ＞100 MΩ at 500VDC
Life : 15,000 cycles
Manual Soldering Max Temp for 3 sec. : 350 °C
Max. Working Voltage : 500V
Max Rotational Stopper Strength : 6Kgf
Operating (Useable) Temperature : -10 °C to +70 °C
Rated Wattage (Power) : 0.5W
Rotational Torque : 20-200 gf-cm
Shaft Diameter : 6 mm
Sliding Noise : ＜ 47 mV
Tap Residual Resistance : ?100 Ω
Taper : Linear
Tolerance : ±20%
Total Rotational Angle : 300° ±5°
Total Shaft Length : 21 mm
Washer I.D. : 8.1 mm
Washer O.D. : 14 mm
Washer Thickness : 0.4 mm
Withstand Voltage : 500 VAC for 1 min.
・パッケージ情報
Packaging Dimensions : 1.5 in. × 1.4 in. × 1 in.
Weight (Packaging) : 0.032 lbs.
在庫がある商品はヤフオク!ストアもご確認ください
Specification Sheet (pdf)
■測定値と仕様■
・製品測定値
Body Depth : 11.5 mm
Body Width : 24 mm
Bushing Length : 11.5 mm
Bushing Thread : M8X0.75
Hex Nut Thickness : 2.0 mm
Hex Nut Width : 11 mm
Insulation Resistance : ＞100 MΩ at 500VDC
Life : 15,000 cycles
Manual Soldering Max Temp for 3 sec. : 350 °C
Max. Working Voltage : 500V
Max Rotational Stopper Strength : 6Kgf
Operating (Useable) Temperature : -10 °C to +70 °C
Rated Wattage (Power) : 0.5W
Rotational Torque : 20-200 gf-cm
Shaft Diameter : 6 mm
Sliding Noise : ＜ 47 mV
Tap Residual Resistance : ?100 Ω
Taper : Linear
Tolerance : ±20%
Total Rotational Angle : 300° ±5°
Total Shaft Length : 21 mm
Washer I.D. : 8.1 mm
Washer O.D. : 14 mm
Washer Thickness : 0.4 mm
Withstand Voltage : 500 VAC for 1 min.
・パッケージ情報
Packaging Dimensions : 1.5 in. × 1.4 in. × 1 in.
Weight (Packaging) : 0.032 lbs.
在庫がある商品はヤフオク!ストアもご確認ください